Creating a New Handling Time for Coupling/Decoupling

New handling times for coupling and decoupling trailers can be created and shown in the overview of handling times for coupling and decoupling.

If the handling times for coupling and decoupling are not dependent on the location where the handling takes place, no location must be specified when defining the handling time. If the handling times in a hall (e.g. hall 101) deviate from the general handling times due to local circumstances, only Hall 101 must be specified when defining the handling time. New handling times can be defined without selecting a trailer type and location. These handling times are generally valid and are always used if there are no specific handling times for the trailer type or location of the transport order.

Prerequisite

Transport management administrator role

Procedure

1. Call up the Work steps > Coupling/Decoupling menu.
2. Use to create a handling time.

   

3. Select a trailer type from the Trailer Type drop-down list.
4. Select the building from the Building drop-down list.
5. Select the hall from the Hall drop-down list.
6. Select the station from the Station drop-down list.
7. Select the storage location from the Storage location drop-down list.
8. To define the time for coupling, enter the value in the Coupling Time (s) input field.
9. To define the time for decoupling, enter the value in the Decoupling Time (s) input field.
10. Confirm the settings with Save.

The handling time is created and appears in the Work steps > Coupling/Decoupling menu.