Handling times for loading and unloading unit load types can be edited.
If the handling times for loading and unloading are not dependent on the location where the handling takes place, no location must be specified when defining the handling time. If the handling times in a hall (e.g. Hall 101) deviate from the general handling times due to local circumstances, only Hall 101 must be specified when defining the handling time. New handling times can be defined without selecting a trailer type and location. These handling times are generally valid and are always used if there are no specific handling times for the trailer type or location of the transport order.
Prerequisite
Role Transport Management Administrator
Procedure
Call up the Work steps > Loading/Unloading menu.
Use to edit handling time.
Select the load unit type from the Load unit typesdrop-down list.
Select the material number from the Material number drop-down list.
Select the building from the Building drop-down list.
Select the hall from the Hall drop-down list.
Select the station from the Station drop-down list.
Select the storage location from the Storage location drop-down list.
Enter information on the loading time:
The loading or unloading time specifies the time for all activities that must be performed when loading or unloading, besides actual transporting of the unit load, e.g. opening doors.
To define the time for loading, enter the value in the Loading Time (s) input field.
To define the time for loading per unit load type, enter the value in the Loading Time Per Unit Load Type (s) input field.
Enter information on the unloading time:
To define the time for unloading, enter the value in the Unloading Time (s) input field.
To define the time for unloading per unit load type, enter the value in the Unloading Time Per Unit Load Type (s) input field.
Apply the changes using Save.
The handling time for loading/unloading is changed.
to edit handling time.