Export Measuring Points

Measuring points can be exported for external analysis.

Prerequisite

Condition Monitoring User or Condition Monitoring Administrator role

Procedure

1. Call up the Efficiency analysis > Condition monitoring menu.
2. Select device.
3. Open the Measured Values tab.

   The measuring points that are activated in the Select Measuring Point drop-down list are exported.

4. Activate measuring points from the Select Measuring Point drop-down list.
5. Open the export settings with .

   

   If a Date or Time Period is set in the filters of the Measured Values tab, the Date or Time Period is automatically entered in the Date/Time Period field.

6. Set the Date/Time Period.
7. Select the Aggregation level.

   Limit values are only available in the Aggregation Level — Raw Data (Max. 10,000 Measured Values). Raw data is only displayed up to six hours in the past. If the maximum of 10,000 displayed measured values is reached, a warning message is issued. All other values are not included in the export.

8. Select Export Format.
9. Export measuring points with Export.
10. Select the directory, enter the file name and confirm with Save.

The measuring points are exported.