Filter Machine Tasks in the Overview

In the Machine maintenance menu, device tasks can be filtered by priority, status, resolving group for the assigned user, maintenance type, reporting date, failure, due date or required downtime for the task.

Machine Maintenance

Prerequisite

User or Administrator role

Procedure

1. Call up the Maintenance > Machine maintenance menu.
2. Open the filter with .
3. To set filters for the priority level, select Priority.

   Active filters are shown with and .

   Active filters can be deleted with .

4. To set filters for the status, select Status.
5. To set filters for the resolving group, select Resolving group.
6. To set filters for the assigned user, select Assignment.
7. To set filters for a maintenance type, select Maintenance type.
8. To set filters for a report date, select Report date.
9. To set filters for a failure that has occurred, select Failure.
10. To set filters for a due date, select Due date.
11. To set filters for a required downtime, select Required downtime.
12. To delete the filter selection, select Reset.
13. Apply filter with Filter.

Only tasks with the selected filters are displayed in the table.