Error Pattern

The error pattern consists of 32 error bits. These can either be entered as plain text in the Error Pattern field or set by clicking on the buttons.

There are three different settings for each bit:

• 0: A 0 must be present at this position.
• 1: A 1 must be present at this position.
• X: This position of the error pattern is no longer taken into account.

The error is displayed only if the 0s and 1s of the error match the error pattern. X is ignored.

Individual error patterns can be defined for each station and its child elements. If errors from lower levels are not intercepted and displayed with their own error pattern, these errors are displayed at a higher level.

Prerequisite: The relevant defined error pattern applies to this error.

Example:

At station level, the error pattern "0000000‑00000100‑00000000‑00000100" has been created. If this process error occurs at the child elements but is not defined there, the error is intercepted and displayed at station level.