Define the divisor of a functional unit, working position or tool position

Specifying a divisor increases the target cycle time for parallel facilities. The divisor shows the distribution of a functional unit, a working position or a tool position in the overall line network.

Prerequisites

• Administration Admin role
• The Facility management section is open. Facility management area

Procedure

1. Select a functional unit (Fu), working position (Wp) or tool position (Tp) in the facility tree.
2. Enter a value in Divisor.
3. Click Save.

The changed divisor is saved.

If, for example, there are two identical parallel facilities, a divisor of 2 must be selected in each case.

However, if there are alternative routes (due to different types/processing), a divisor of 1 must be selected in each case.