The weight increase and/or the total weight of the packing unit can be checked during the packing process before the unit can be packed.
Check weight increase
Specifying the WeightGain type data variable means that the weight increase is checked per aggregation (e.g. packing part in box) and further progress is interrupted until the validation succeeds.
Record tare weight
If the higher-level packing unit is empty, the tare weight is calculated when packing the first sub-packing unit. The weight must be at rest, i.e. stable, and must not fluctuate. The tare weight is only relevant for weight increases and is only requested for this purpose.
If the connected scales show fluctuations when recording the tare weight, this will be signaled accordingly and it will not be possible to confirm the dialog. The time until which it is automatically closed is reset.
Check total weight
Specifying the Weight type data variable means that the system checks the total weight of the relevant packing unit (box or pallet) before the packing process is completed, and validates it in line with the definition.
