Configure Deviation Notification

If the Nexeed Deviation Processor module is installed, the Deviation Notification menu is available.

Prerequisite

Condition Monitoring User or Condition Monitoring Administrator role

Procedure

  1. Open the Efficiency Analysis > Deviation Notification menu.
  2. Open the deviation with mdm_edit_icon.

    cm_deviaition_configuration_edit_2023_01

  3. Select the device or device type from the Context drop-down list.

    The Device or Device type input field appears.

  4. Enter the name of the device in full or in part, then select the Device from the drop-down list.

    Or:

    Enter the name of the device type in full or in part, then select the Device Type or multiple device types from the drop-down list.

  5. Enter the Code of the triggered rule or of the machine message, then confirm this with [ENTER].

    Any number of codes can be entered. If multiple codes are entered, only one of the codes needs to be triggered to create a deviation.

  6. Configure the deviation with Save.

The deviation has been processed.