Create or Edit Quick Reaction

Quick reactions can be created to automatically respond to deviations. The quick reactions check certain parameters of the deviations. If the parameters match the parameters of the quick reaction, the quick reaction triggers and an action that was specified when the quick reaction was created is automatically performed.

Prerequisites

Procedure

  1. Call up the Quick reactions tab in the Shopfloor management > Deviation processor menu.
  2. To create a new quick reaction, click add_border in the header.

    Or:

    To edit an existing quick reaction, select the required quick reaction in the table of quick reactions and click mdm_edit_icon Edit in the header.

    dp_create_quick_reaction_conditions

    In the Create Quick Reaction dialog, the first step Set Conditions is to define parameters for when the quick reaction should trigger.

  3. On the left, select the desired parameter.
  4. On the right, select the values at which the quick reaction is to be triggered.
  5. Click Next to go to the next step (Define action).

    dp_create_quick_reaction_aktion

    In the Create Quick Reaction dialog, the second step Define Action specifies the action to be performed when the quick reaction is triggered. Under the action, if applicable, fields are listed with the specific information to be sent to the reaction executing system during the action.

    The information data that fields are displayed for differs according to the selected action and depends on the data provided by the reaction executing system.

  6. From the Action drop-down list, select the action to be performed if the parameters of a deviation match the previously created parameters of the quick reaction.
  7. Under the Action drop-down list, enter the information values to be sent when the quick reaction is triggered.
  8. Click Next to go to the next step (Validate and save).

    dp_create_quick_reaction_validate

  9. Check that the values have been entered as desired. If necessary, use Back to return to the previous steps to adjust the values there.
  10. Enter the name of the quick reaction in the Title input field.
  11. Press Save to create the quick reaction.

The quick reaction is shown in the Quick reactions tab in the table. As soon as a deviation with matching parameters is reported, the quick reaction triggers and performs the selected action.