In the Planning & control > ID Builder menu, under the Test client tab, the code definitions of the active configuration in the Configuration tab can be tested. The code definitions can be tested so that the generated codes are assigned correctly in Nexeed IAS. Codes for code definitions are returned during testing. If variables are defined for the code definition, the variables must be entered with values. If counters are required for the code definition, they must be created in the Counters tab.
Element/icon/column |
Description |
|---|---|
Selection of the data format |
Select data format: Form data If the Form data option is selected, the Code definition drop-down list and the Add variable button will appear. Test configuration with the form data option JSON If the JSON option is selected, an input field appears. The code definition and the variables can be entered in the JSON code format in the input field. |
Code definition |
Select code definition from the drop-down list. |
Execute |
Generate code. |
Input variables
If Add variable is selected in the Form data option, the Input variables input fields appear. If a Code definition that requires variables is selected in the Form data option, the Input variables input fields appear with the pre-filled keys of the variables.
Element/icon/column |
Description |
|---|---|
Key |
Enter the name of the variable. |
Value |
Enter the value for the variable. |
Add variable |
Add another variable. |
|
Delete variable. |
Reset |
Remove all entered and selected entries. |
