Set up and remove the tool in/from the device

Tools can be set up or removed in/from devices. Devices can be created on the Master data management > Facilities tab. All tools that have been set up are displayed on the Tool management > Tool information > Setup overview tab.

Device types

Tool control: Hierarchy tab

Prerequisite

Tool Management User or Tool Management Expert or Tool Management Admin role

Procedure

1. Call up the Tool management > Tool information > Tools & components tab.

   Or for removal:

   Call up the Tool management > Tool information > Setup overview tab.

2. Select a tool.
3. Select Set up tool in the detailed view.

   Or:

   Select Remove tool.

   Example: Set up tool

   When removing tools, the Facilities field is omitted.

   

   If a restriction is active for the selected tool, a facility or a device is preselected in the Facilities field.
   Tool control: Types Tab — Restrictions

4. Use the Facilities field to search for and select a device.
5. Select Reason from the drop-down list.

   Settings: Predefined reasons tab

6. Enter Comment.
7. Set up tool with Set up in device.

   Or:

   Remove tool with Remove from the device.

The tool is displayed or no longer displayed on the Tool management > Tool information > Setup overview tab.

Tool Information: Mounting Overview tab