Configure the tool or component

General data for the tool or component, such as the name and the release status, can be changed.

Release and health state of the tools and components

Tool control: Tools and Components Tab – General

Prerequisite

• Tool Management Expert or Tool Management Admin role
• A tool or component has been created.
  Creating a Tool or Component and Importing Tools or Components

Procedure

1. Call up the Tool management > Tool control > Tools & components tab.
2. Select a tool or component.
3. In the detailed view, call up the General tab:

   If auto-naming is enabled, the name cannot be changed.
   Settings

   • Enter the Name.
   • Select Release status and Area.
   • Enter the Serial number and SAP Equipment ID.
4. Insert Image.

   Or:

   Delete Image.

5. Change tool or component with Save.

The tool or component is configured.

• To adjust the limits of the tool or component counter, continue with Configuring Limits for Tool or Component Counters.
• To add a history entry to the history of a tool or component, continue with Creating an entry in the tool or component history.
• To export the history of the tool or component, continue with Exporting the history of the tool or component.