Link the component or material of a product parts list to an action

If components or materials of a product parts list must meet certain criteria before they are packed, they can be linked to actions. These actions contain parameters that must be complied with when checking the component or material (e.g. measurement types, units of measurement, tolerance limits).

The data for the respective action can be opened with the component or the material for further processing from the Nexeed Packaging Control client and, if applicable, from additional modules.

Actions can be created and edited in Master data > Actions.
Master data: Aktioner

Requirements

• At least one product with at least one product parts list has been created.
  Create product parts list
• Expert or Administrator role

Procedure

1. Open the Product parts lists menu.
   Product parts lists
2. In the overview, select the product in whose product parts list a component or a material is to be linked to an action. Filter by product if necessary.

   

   All product parts lists for the product are listed in the Variants/versions view.

3. Select the desired product parts list in which a component or material is to be connected to an action.
4. Use to open the Component/material list view.

   

   All components and materials in the product parts list are displayed.

5. Click in the row of the desired component or material.

   

   All available actions are listed in the Link to action dialog window.

6. Activate one or more checkboxes of the desired actions that are to be linked to the component or material.
7. Apply the link using Save.

The component or material is linked to the action. All products, components and materials that are linked to an action can be displayed in Type/material actions.
Type/Material actions

• Continue with Link product to an action to link a product to an action.